Juniper Mist

CONFIGURATION GUIDE

The purpose of the following manual is to describe the necessary configuration of Juniper Mist equipment for integration with Octopus Platform.

1- Pre-requisites

• Before starting the configuration you must log in to Juniper Mist: Mist Systems

• If there is a firewall in the network that might block the traffic, you will need to allow access to some domains to enable user's authentication:

  • Radius Servers:

    • Primary: <IP_Radius_1> 1812 and 1813 UDP ports

    • Secondary: <IP_Radius_2> 1812 and 1813 UDP ports

  • Splash Portal server: 

    • Domain <captive_portal_domain> 80 and 443 TCP ports

• For the operation of the Guest and Enterprise modules configuration, it will be necessary to previously contract the Octopus platform licenses with the respective modules.

2- Guest module configuration

2.1 Create or edit WLAN WiFi Guest

Go to Network > WLANs > Select or create the WLAN to be used:

• SSID: SSID of the network, Example: Wifi Guest

 

 

• WLAN Status: Enable

 

 

 

• Security: Open Access

 

 

 

 

Open

Open

2.3  Walled Garden

Una vez terminado la configuración hacer click en Create

2.3 Authorized MAC Addresses

For user validation to work correctly in the WiFi platform it is necessary to identify the NAS that will be able to make authentication requests to the Radius Server. In this case, all the MAC addresses of the Access Points that will radiate the configured SSID must be added.